|
An adapter which allows class A/B amplifiers such as
Marshall and Fender, to replace their output tubes with the EL-84 tube, and
operate in class A. This reduces the power of the amplifier. In the case of a 100 watt amp, the output will be
about 40 watts. In a typical 50 watt amp, the power will be
about 20-25 watts.
These are used in pairs or quads, not individually. These are NOT for
use in Class A amplifiers. For Class A amplifiers, please use the 928, not
this 928-PR.
These will reduce the load on your power transformer, and allow your amp to
reach distortion, with a nice AC-30 or EL-84 sound and feel at levels that are
lower and more friendly to recording and venues where your amp will not feel,
play, or distort at the amplifier's normal higher sound
levels.
Dimensions - tube tip to amp chassis requires 4 1/4".
These should not be use in amplifiers with over 490 plate volts
|
